NO | Items | Standard | |||||||||||||||||||||
1 | Rated load(kg) | 450(6P) | 630(8P) | 800(10P) | 1050(14P) | ||||||||||||||||||
2 | Speed(m/s) | 1 | 1.6/1.75 | 1 | 1.6/1.75 | 1 | 1.6/1.75 | 1 | 1.6/1.75 | ||||||||||||||
3 | Control method | Full selective collection | |||||||||||||||||||||
4 | Driving method | VVVF driving | |||||||||||||||||||||
5 | Door operator | VVVF door operator | |||||||||||||||||||||
6 | Traction machine | Permanent magnet synchronous gearless | |||||||||||||||||||||
7 | Control system | CTRL70 | |||||||||||||||||||||
8 | Communication method | Serial communication | |||||||||||||||||||||
9 | Center opening Wide car (mm) |
Car size(W*D*H) | ----- | 1100x1400x2200 | 1350x1400x2200 | 1400x1600x2200 | |||||||||||||||||
10 | Door opening size(W*H) | ----- | 800x2100 | 800x2100 | 900x2100 | ||||||||||||||||||
11 | Shaft size(W*D) | ----- | 1750x1800 | 1850x1800 | 1950x2000 | ||||||||||||||||||
12 | Center opening Deep car (mm) |
Car size | ----- | ----- | ----- | 1100x2100x2200 | |||||||||||||||||
(W*D*H) | |||||||||||||||||||||||
13 | Door opening size(W*H) | ----- | ----- | ----- | 800x2100 | ||||||||||||||||||
14 | Shaft size(W*D) | ----- | ----- | ----- | 1750x2500 | ||||||||||||||||||
15 | Side opening car (mm) |
Car size | 1000x1200x2200 | 1100x1400x2200 | 1350x1400x2200 | 1100x2100x2200 | |||||||||||||||||
(W*D*H) | |||||||||||||||||||||||
16 | Door opening size(W*H) | 800x2100 | 800x2100 | 900x2100 | 900x2100 | ||||||||||||||||||
17 | Shaft size(W*D) | 1500x1600 | 1600x1800 | 1850x1800 | 1650x2500 | ||||||||||||||||||
18 | Travel (m) | ≤45 | ≤75 | ≤45 | ≤75 | ≤45 | ≤75 | ≤45 | ≤75 | ||||||||||||||
19 | Traction machine position | Inside the Shaft | |||||||||||||||||||||
20 | Overhead (mm) | 3500 | 3700 | 3500 | 3700 | 3500 | 3700 | 3500 | 3700 | ||||||||||||||
21 | Pit (mm) | 1100 | 1210 | 1100 | 1210 | 1100 | 1210 | 1100 | 1210 | ||||||||||||||
22 | Rated power(kW) | 2.7 | 4.6/5.0 | 3.8 | 6.4/7.0 | 4.8 | 8.1/8.9 | 6.1 | 10.1/11.1 | ||||||||||||||
23 | Rated current(A) | 8.0 | 12.5 | 11.0 | 17.0 | 13.5 | 22.0 | 16.5 | 26.0 | ||||||||||||||
24 | Main power supply &cable size |
380V,50Hz,3-phase 5-wire,zero wire and ground wire separated, requirements refer to construction drawings | |||||||||||||||||||||
3*6mm2+2*6mm2 | 3*10mm2+ 2*6mm2 |
3*6mm2+2*6mm2 | 3*10mm2+ 2*6mm2 |
3*6mm2+2*6mm2 | 3*10mm2+ 2*6mm2 |
3*6mm2+2*6mm2 | 3*10mm2+ 2*6mm2 |
2. Car height“2200 mm”,which is the height from car floor to car top. If using optional ceiling, the car height should be accordingly increased.
3. For dual entrance, the support plates should be provided at the pit.